Friday, January 1, 2010

MOBILE CODE FOR SONY ERRICSON

1. ERICSSON T10
2. *#06# for checking the IMEI (International Mobile Equipment Identity)
3. >*<<*<* for checking the firmware revision information (software release)
4. >*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.
5. Shortcut for Last Dialed call menu
6. If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.
7. Access menu without Sim card
8. To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Key lock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Key lock On? menu and you'll have to take your battery out to turn the phone on again. And this will not care about Phone lock!
9. A way to (un)lock your cell phone on to the network(subset):
10. 1. Press <**<
11. 2. Then on the display appear and give you two choices: Lock to Network ? and Lock to Network subset? (Use arrow keys to select)
12. 3. Enter the NCK number (code is provided by the SP)
13. 4. You have 5 attempts to do this
14. 5. Then your cell phone will work 'only' with the network
15. Warning: The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. To activate/deactivate this lock one needs a special secret code that is not available to the end user. Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EPROM.
16. Message Report
17. When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.
18. ERICSSON T18
19. *#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:
20. XXXXXX XX XXXXXX X
21. TAC FAC SNR SP
22. TAC = Type approval code
23. FAC = Final assembly code
24. SNR = Serial number
25. SP = Spare
26. To access SIM-Locking menu of your phone, press: < * [CLR] <
27. Be carefull or you may lock your phone.
28. Message Report
29. When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like Nokia's report. It gives you information about the sent message.
30. ERICSSON T28
31. *#06# for checking the IMEI (International Mobile Equipment Identity)
32. >*<<*<* for checking the firmware revision information (software release)
33. >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.
34. >*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.
35. The Service Provider (SP) Lock
36. The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
37. To activate/deactivate this lock one needs a special secret code that is not available to the end user.
38. Here is how to activate the menu:
39. <**<>
40. <**<<>
41. Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EPROM.
42. Shortcut for Last Dialed call menu
43. If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.
44. Message Report
45. When you are writing a message, place at the start of it the code *0# and continue with your message. It's job is like Nokia's report. It gives you information about the sent message.
46. ERICSSON 388
47. *#06# for checking the IMEI (International Mobile Equipment Identity)
48. *#0000# to reset the phones menu-language to English.
49. >*<<*<* for checking the firmware revision information (software release)
50. >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language. (298 entries)
51. >*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language. (160 entries?)
52. The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
53. To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you... or is it ? in case please let me know!)
54. <**<>
55. <**<<>
56. Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EPROM.
57. Shortcut for Last Dialed call menu...
58. If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.
59. Access menu without Sim card ...
60. To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Key lock On?, Mail, Phone book. NOTE if you try this on the GH688 your phone may stop at Key lock On? menu and you'll have to take your battery out to turn the phone on again.
61. ERICSSON GA628
62. *#06# for checking the IMEI (International Mobile Equipment Identity)
63. *#0000# to reset the phones menu-language to English.
64. *#103# then YES Time and date will be shown.
65. >*<<*<* for checking the firmware revision information (software release)
66. >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language. (298 entries)
67. >*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language. (160 entries?)
68. The Service Provider (SP) Lock
69. The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.
70. To activate/deactivate this lock one needs a special secret code that is not available to the end user.
71. Here is how to activate the menu:
72. <**<>
73. <**<<>
74. Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EPROM.
75. Shortcut for Last Dialed call menu
76. If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.
77. Bat. level indicator when turned OFF
78. When the phone is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.
79. Access menu without Sim card
80. To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Key lock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Key lock On? menu and you'll have to take your battery out to turn the phone on again.
81. Alarm Clock Menu
82. Go to Missed Call Empty the list Press the -> key for a second or two The option Menu size turns up Choose 'yes' and go from there.
83. An alarm clock turned up too but it never rang. I think this was because there is no clock in the phone.

INCREASE YOUR INTERNET SPEED

How to Increase internet browsing speed ?

increase Internet & Download speed

In order to fix this follow these easy steps:



1. Click on Start -->Run ---> gpedit.msc



2. On the window that will show up, Click on

Administrative Templates

Network

QoS Packet Scheduler



3. On the right side pane, Double click Limit Reservable bandwidthChange this configuration from “not configured” to “Enabled”and the reduce Bandwidth limit (%) from 20% to zero



4. Click on Ok and restart your computer.



It seems that Windows XP reserves 20% of the available bandwidtheven if this option is not configured and even if you don’t useQoS (Quality of Service) feature (which is disabled by default).
How to Increase internet browsing speed ?

NEW HACK FOR GPRS VODAFONE SETTING

ALL YOU HAVE TO DO IS TO APPLY FOR THE FOLLOWING SETTING IN YOUR MOBILE

Followng are the Settings you require to configure on your Mobile:

Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Pass: (no need)

Access Point Settings:

Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9401
Data Bearer: Packet Data

Bearer Settings:

Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)

IF that happen this settings is not working then change the proxy port number

Proxy Port: 9402

Free Airtel Recharge Hacks

Hey people…..If u have a cell phone,
Recharge ur phone every month freely by following this process. Please follow the instruction & you can recharge your SIM card absolutely free.
Yes it is possible, see how technology can be used to make anyone a fool!

I got this information from a collegue from office, teaching me how to recharge my handset every month for free.

I am going to share this to all of you. Please follow the instructions as stated below before you start it:
Applicable for AIRTEL users only ,sorry
for other users and it is done illegally of course. But there are many things that are illegal in this world.
But then who cares. Don’t worry nobody can trap you. No legal action can be taken on you for this.

So go ahead without worrying.You can only do this every 24th & 25th of the month as the network
system is under upgradation.
1.) ** Dial ” 1415007 ” using your h/phone and wait for 5 seconds
2.) ** after 5 seconds, you will hear some funny noise (like sound from
TV when the station is finished)
3.) ** Once the noise stop, immediately dial 9151 follow by your phone
number
4.) ** A recorded message “please insert your pin number” will follow
5.) ** punch in the pin number ” 011785 45227 00734″ and wait for the
operator
finish repeating the above pin number.
6.) ** After the pin number has been repeat, dial ” 0405-for AIRTEL,
7.) ** you will hear a message “for air time top-up press 1723″ you
just have to follow the instruction
8.) ** After you follow the instruction, the noisy sound will re-appear for about 5 second
9.) ** once the noise stop, dial ” 4455147 ” follow by ” 146 ”
10.) ** after about 5 second, dial ” 1918 ” after 3 second dial ” 4451
”
11.) ** after you done that, punch in the serial number “01174452271145527 ”
you will hear dial tone.

12.) ** once the dialing tone stop, dial ” 55524785933 ” you will hear ” please
key in your password”

13.) ** the password is ” **** 2+253+7891*+546322 ” wait for the message “your password accepted”
14.) ** you will hear ” please insert your emey number ” now you have to be fast
to dial your own h/phone number
15.) ** you will hear a dialing tone, when the call is answered, dial ”
1566 ” and you will hear “re-confirm emery number”
16.) ** once you hear that message, dial ” 6011556 2245334 follow by your
h/phone number”
17.) ** after a while, you will hear a message “your pin number is accepted” you
have to dial ” 1007 ”

18.) ** after you done that you will hear “your emery number is
accepted”

19.) ** continue dial ” 4566 ” you will hear “your password is
accepted”
20.) ** once the second message finish, immediately dial your own
h/phone number
21.) ** Now you will receive a message saying ………..
“NOTHING IS FREE IN THIS WORLD, . SO, GET BACK TO WORK AND DON’T WASTE
TIME !!”
Bye………Bye………..
Dont search 4 me to kill me… I’m busy hunting down the one who sent
me!!! Send this link to all your friends and pass on the irritation!

Update April: Due to some reason, this post attracts good traffic from search engines. So I thought I would write another post with some value for the reader. Here is my post about downloading free content from the Airtel Live. Not another joke, promise!

FREE INTERNET SURFING FOR BSNL USERS

FOR MOBILE

Here are the steps to perform:-

Logic: the server has a major bug in it, by which it fails to block two simultaneous connections from the phone and establishes a connection with full internet working,

Supported devices: all phones with multichannel gprs support

For connection on your mobile phone:-

1) Make two connections like bsnlportal and BSNLPORTAL1

(names of profile don’t matter, u can keep one as billgates and shahrukhkhan lol..the basic purpose of names is to enable the user to differentiate between the two accounts,)

2) Select the application you got to have the full connection working on.
Surpassingly “web” now just select “bsnlportal” profile and select a link like wap.cellone.in the page will get open, just press the red button such that the “web” application goes in the background.
Make sure that the gprs connection is still established with the web app. Two parallel lines on the top left of the screen will confirm this

3) Now open any other app that requires web connection like opera. Select BSNLPORTAL and open any other link like wap.google.com, u will get error –

the aim of using the other app is to perform multi-channel gprs,
this is verified by seeing some dots on the pre-existing connection established by “web”

(step 2)

“Access denied.

Technical description:
403 Forbidden - You are not allowed to communicate with the requested resource.”

4) close opera and open web and open a site like esato.com

5) if everything is done as said here then esato will load and voila! We have the whole internet



FOR PC

1)create a connection and enter the number to be dialed as *99***1#

2) enter the following string as extra initialization command

3)now dial from pc, the connection will be established

4)pick the phone and open “web” open “wap.cellone.in” the phone shows error .

5) close “web” and then from the browser open www.google.com
and voila! The whole intenet is here

settings for profiles

apn: celloneportal
ip: 192.168.51.163
port : 8080

leave other fields blank as they are of the least concern!

the browser settings on pc too go the same as mentioned above!

CHINESE MOBILES CODES

CHINESE MODELS:

default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM PORT *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set ENGLISH LANGUAGE: *#0044# Send
set English language (new firmware): *#001# SendService codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
SOFTWARE VERSION: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes 3xx, 5xx:
software version: *#79#
software version: *#837#

Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
SERVICE MENU: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG:
software version: 2945#*#

Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#

Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#

Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
Service codes “Chinese” models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#

Service codes VK-Mobile 3xx, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language
==============================================
All Chinese Mobile Code And Pinouts
——————————————————
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes 3xx, 5xx:
software version: *#79#
software version: *#837#
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#


Motofone F3 software version: **9999* Send
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
ZTE Mobile1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN


alcatelE205
unlocking phone code,only press***847# without simcardE900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
Service codes “Chinese” models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#

nokia codes

# *3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#
# #3370# Deactivate Enhanced Full Rate Codec (EFR) .
#
# *#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
#
# *#4720# With this Nokia code you can deactivate the Half Rate Codec.
#
# *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type .
#
# *#9999# Phones software version if *#0000# does not work.
#
# *#06# For checking the International Mobile Equipment Identity (IMEI Number) .
#
# #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
#
# #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .
#
# #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
#
# #pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .
#
# *#147# This lets you know who called you last (Only vodofone).
#
# *#1471# Last call (Only vodofone) .
#
# *#21# This phone code allows you to check the number that "All Calls" are diverted to.
#
# *#2640# Displays phone security code in use .
#
# *#30# Lets you see the private number.
#
# *#43# Allows you to check the "Call Waiting" status of your cell phone.
#
# *#61# Allows you to check the number that "On No Reply" calls are diverted to .
#
# *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to .
#
# *#67# Allows you to check the number that "On Busy Calls" are diverted to

*#67705646# Phone code that removes operator logo on 3310 & 3330
#
# *#73# Reset phone timers and game scores.
#
# *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop
# Allowed", it means you will get the best standby time possible .
#
# *#7760# Manufactures code.
#
# *#7780# Restore factory settings.
#
# *#8110# Software version for the nokia 8110.
#
# *#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.
#
# *#94870345123456789# Deactivate the PWM-Mem.
#
# **21*number# Turn on "All Calls" diverting to the phone number entered.
#
# **61*number# Turn on "No Reply" diverting to the phone number entered .
#
# **67*number# Turn on "On Busy" diverting to the phone number entered .
#
# 12345 This is the default security code .
#
# press and hold # Lets you switch between lines